Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 10:43:46 GMT
Well done! Asked this the other day but no reply. Has the toolkit got everything needed for the common T3 jobs, ie, hub greasing, changing cassette and chain, changing bottom bracket to Hollowtech etc? Assume x1 unless it says more ok freewheel remover bottom bracket tool Chain rivet extractor 2x cone wrench Chain whip Multi sized spoke wrench 8mm hex wrench Crank arm remover Crank tool Open end wrench 8/10mm Cross head screwdriver 3 x plastic tyre levers 7 in 1 multi tool flat head and Cross headed screwdriver hex key 2,3,4,5,6mm Patch kit If you need that to do the work you want yes if not no ( I have not done much to teetree yet.) That sounds pretty good. Cheaper than the Lidl one aswell I think. I'd also be interested to know if the pump's any good.
|
|
|
Post by Spoakes on Jul 7, 2013 10:48:07 GMT
Assume x1 unless it says more ok freewheel remover bottom bracket tool Chain rivet extractor 2x cone wrench Chain whip Multi sized spoke wrench 8mm hex wrench Crank arm remover Crank tool Open end wrench 8/10mm Cross head screwdriver 3 x plastic tyre levers 7 in 1 multi tool flat head and Cross headed screwdriver hex key 2,3,4,5,6mm Patch kit If you need that to do the work you want yes if not no ( I have not done much to teetree yet.) That sounds pretty good. Cheaper than the Lidl one aswell I think. I'd also be interested to know if the pump's any good. Pump Is ok but when you push it down and if you lift it a little again it will loose a bit of pressure so not that impressed. Annoyed as I got the pump instead of the wireless comp
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 14:25:07 GMT
The wireless computers are fantastic, think my last one was something like £7, blows the pants off my £20 decathlon one!! Can it be switched 90 degrees for stem attachment or is it handlebars only?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 14:28:49 GMT
The wireless computers are fantastic, think my last one was something like £7, blows the pants off my £20 decathlon one!! Can it be switched 90 degrees for stem attachment or is it handlebars only? Just looked at the one I bought and it appears bars only.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 14:42:27 GMT
Thanks. That's a shame. Sounds very good otherwise. I'll have a look at the Lidl one on Thurs but would guess it's the same.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 14:47:00 GMT
Just bought (and used) the work stand, great bit of kit for the money.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 14:49:18 GMT
Thanks. That's a shame. Sounds very good otherwise. I'll have a look at the Lidl one on Thurs but would guess it's the same. If it has the same bracket as my wired Lidl comp then it should fit the stem.
|
|
|
Post by Spoakes on Jul 7, 2013 15:14:36 GMT
Just bought (and used) the work stand, great bit of kit for the money. Mine had a bolt missing but as all men I have a man draw which a always comes through for me!
|
|
moggym
Peloton Rider
Posts: 70
|
Post by moggym on Jul 7, 2013 15:30:02 GMT
I bought the workstand and the toolkit from the cheltenham store. Loads of everything in there. Put the stand together, and fair play its a cracking piece of kit for the money.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 15:34:55 GMT
Was in my local shop and got the bike stand too....looked at the tool kit but wasnt sure if it would be cheap material that wears out after 2 uses or not? anyone know if they will stand the time or if best getting proper tools....more money but last forever so money well spent that way.
|
|
mylovelyhorse
Peloton Rider
Waiting for my next ride...
Posts: 119
|
Post by mylovelyhorse on Jul 7, 2013 17:21:15 GMT
Well a short trip to Fareham ALDI this morning got me the bicycle stand. I used it this afternoon to clean my Other Bicycle and it seems a well made & sturdy device.
Thanks for the heads-up!
|
|
|
Post by spaceflightorange on Jul 7, 2013 17:28:22 GMT
popped in just before closing in Liverpool. Plenty of stuff, picked up a stand, haven't tried it yet.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 20:51:34 GMT
Was in my local shop and got the bike stand too....looked at the tool kit but wasnt sure if it would be cheap material that wears out after 2 uses or not? anyone know if they will stand the time or if best getting proper tools....more money but last forever so money well spent that way. . I bought the tool kit and have broken 1 of the Tyre levers all ready.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 20:56:14 GMT
Here's my stand in action. The base is alot wider than I was expecting.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 7, 2013 21:51:50 GMT
How's it on the seat post
|
|