|
Post by richardw on Jul 5, 2015 18:59:55 GMT
Wasnt sure which bit of tech discussion to put it in so if it needs moving please do so.
Gave the bike a bit of a service and clean tonight and noticed something that im not sure is ok or not.
The bottom bracket/pedal arms whatever there called have a fraction of a mm's movement when the pedal arms are at 3-9 postion, almost as though the bottom bracket is loose. But when the pedal arms are at 6-12 theres nothing and have no movement. I took the bottom bracket apart and cleaned it, lubed it and retightened it and its still there. The crack spins nicely and doesnt grind or sound loose.
Any thoughts or advice on what to do or if its ok.
ta
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 5, 2015 19:04:51 GMT
Your solution is what I would have suggested it worked on my T3 when I found a wee bit of play. If you have covered lots of miles it may be time to change BB...
|
|
|
Post by richardw on Jul 5, 2015 19:20:17 GMT
what length of guarantee do Decathlon give? Worth a try blagging one out of them?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 5, 2015 21:23:05 GMT
|
|